9 raisons pourquoi le courant continu pourrait remplacer le courant alternatif

DC Current

Gregory Reed, Ph.D.

La puissance électrique par courant continu est une technologie perturbatrice en émergence qui a le potentiel de stimuler la croissance économique, inspirer l’innovation, développer la recherche et des opportunités, créer de l’emploi et jouer un rôle clé dans le développement durable. La technologie du courant continu et ses applications offrent la promesse d’une meilleure efficacité énergétique, une qualité énergétique améliorée et plus fiable et en accord avec les principes d’une énergie propre et renouvelable. La puissance par courant continu commence à remplacer le courant alternatif comme norme internationale pour la transmission de l’électricité dans plusieurs applications, sur la base des neuf raisons décrites dans cet article. 

Direct Current (DC) electric power is an emerging disruptive technological area that has the potential to stimulate economic growth, inspire innovation, increase research and development opportunities, create jobs, and simultaneously advance environmental sustainability. 

DC technology and applications offer the promise of enhanced energy efficiency, improved power quality and reliability, and inherent alignment with renewable and clean energy development.

The power of direct current (DC)

DC power is beginning to evolve towards replacing AC as a worldwide standard for electricity delivery infrastructure, in many applications, based on the nine reasons listed below:

1. DC power is significantly more energy efficient than AC power.

• DC motors and appliances have higher efficiency and power to size characteristics.

• DC-based lighting (LED) is as much as 75% more efficient than incandescent lighting.

• The greater efficiency resulting from recent developments in DC converter technology allows improvements in electricity delivery over long distances.

2. DC is inherently compatible with renewable sources of energy such as solar and wind. These renewable sources generate power intermittently (when the sun shines or the wind blows), requiring storage (batteries) in some applications as part of the system in order to provide reliable supply, and also require a power conversion interface to the grid. Solar PV is inherently a DC energy supply, as are batteries, making DC a more naturally compatible interface.

3. Energy storage integration is enhanced. Energy storage is required to improve the capacity utilization of renewable energy supplies. Most energy storage technologies are DC-based (primarily in the form of battery technologies), creating opportunities for improved integration efficiencies and reduced operating losses.

4. Electronic equipment operates on DC power. There is a loss of 5% to 20% when AC power is converted to DC power. The increasing reliance on electronic equipment creates a greater need for DC power. Eliminating these conversion losses from AC to DC will become even more important, and will motivate a shift to DC power, and require advances in new power conversion technologies.

5. DC and Hybrid AC/DC micro-grids are being developed. Micro-grid applications can effectively integrate local power generation with the main power grid to effectively serve defined end-use loads; improve reliability, especially under disturbance event conditions; and create opportunities to buy and sell (net metering) power to minimize energy costs to the consumer.

6. The technology needed to gain the advantages of DC power in data centers, homes, and communities is making significant advances.

• DC power is already in use at the “bottom of the pyramid,” for example in rural India and China, because the national (AC) power grid does not reach there. Four states in India are experimenting with providing DC power to homes; a 2014 initiative that is created and led by a partner in the Business of Humanity® project, with the financial support of the Central Government in India.

• Also, the most significant new consumers of electric power today are the companies (Google, Apple, Visa, etc.) at the “apex of the pyramid,” which operate computer data centers and server farms. They need DC power because electronics require DC power. New developments for DC applications are creating investment in local DC power generation in order to ensure 24/7 reliability with zero downtime, and improve the efficiency of supply.

• Electric vehicles use DC (battery) power and their batteries can be charged using DC power in a small fraction of the time needed for charging using AC power. In Europe, smart villages that use DC power are being designed, and electric vehicles are envisaged as part of the storage system for renewable power.

7. New technologies support clean, local, distributed generation of DC power. Solar, wind, second-generation clean biomass, and innovative, low-cost fuel cell designs that use natural gas are ideal for green, local power generation. DC infrastructure will help to better improve the integration of such resources into the grid, and enhance their overall economic and environmental value proposition.

8. Many new long distance transmission lines in the U.S., China, India, and Europe are moving toward ultra-high voltage DC (HVDC). In the U.S., the new transmission lines from major wind and solar farms in the mid-west and western states are being planned as HVDC, in addition to an emergence of HVDC merchant transmission projects throughout the county. There already are approximately 20 HVDC systems in operation in the U.S. and Canada. All of China’s new high voltage transmission is planned as HVDC, with dozens of systems already in operation and over 20 new systems in planning stages. Europe is expanding and upgrading much of its transmission infrastructure with HVDC being a significant part of their plans, including interconnection of nations and continents. HVDC transmission is cheaper than AC at a certain distance for power delivery, because of recently developed disruptive technologies involving power semi-conductors. Other esoteric technical reasons (such as elimination of the “skin effect” that arises with AC) and reduced losses through advanced power converter designs motivate the shift to DC transmission. Moreover, the investment for HVDC transmission is less because the gauges (thickness) of the wires can be smaller, and because one less wire is required (two poles for DC vs. three-phases for AC). Therefore, many of the major reasons why the world went with AC at the turn of the 20th century are no longer relevant. Today there are strong economic reasons and sustainability-related incentives to invest in DC infrastructure.

9. In China and Europe, new cities and villages are being envisioned that will be entirely DC powered. In green-field applications, from resource and delivery infrastructure to end-use applications, complete DC system concepts and operation are being considered in many developing parts of the world. As we look to electrify more remote parts of the globe, there are many advantages to employing DC infrastructure.


 

Gregory Reed, PhD, is the Director of the Electric Power Initiative in the Swanson School of Engineering at the University of Pittsburgh, Director of the University’s Center for Energy, and Associate Professor of Electric Power Engineering in the Swanson School’s Department of Electrical & Computer Engineering. He is also the Director and Technical Lead of the Grid Technologies Collaborative for the U.S. Department of Energy’s National Energy Technology Laboratory, and an inaugural member of the National Academies of Science and Engineering’s Energy Ambassador Program. In addition to these roles, he is the owner and principal consultant of Power Grid Technology Consulting, LLC.

 

Related Articles


Monde en mouvement

  • Jean Boulet au 74e congrès de la CMEQ

    Jean Boulet au 74e congrès de la CMEQ

    4-novembre-2024 De gauche à droite: Suzanne Tremblay, députée de Hull; Erik Kingsbury, président de la CMEQ; Jean Boulet, ministre du Travail; Julie Senécal, directrice générale de la CMEQ;Mathieu Lévesque, député de Chapleau et Michel Beaudoin, président-directeur général de la RBQ. Jean Boulet a profité de son passage pour réaffirmer sa volonté de construire un avenir… Read More…

  • Prix honorifiques à Congrès CMEQ 2024

    Prix honorifiques à Congrès CMEQ 2024

    4-novembre-2024 Le Prix Grande Distinction 2024 a été remis à Mme Nathalie Morin, section Longueuil – Sorel, pour s’être distinguée à titre de présidente de section. Notons qu’il s’agit d’une première dans l’histoire des prix honorifiques de la CMEQ. Le Prix Engagement 2024 été remis à Jean Larrivière, section Mauricie, pour sa grande disponibilité et… Read More…


Formation et événements

  • 4-novembre-2024 Daniel Breton, PDG de Mobilité électrique Canada, Alain Fiset, copropriétaire de Fize électrique et Daniel Sarrazin, président de Fusion énergie ont su capter l’attention de la centaine d’entrepreneurs électriciens venus entendre parler de la transition énergétique Près de 300 personnes ont pris part au banquet de clôture qui s’est déroulé sous le thème du… Read More…

  • 7-octobre-2024 Inscrivez-vous ici  À la fin du mois d’octobre, le « Hong Kong Trade Development Council » accueillera deux événements majeurs de l’industrie de l’éclairage : le Hong Kong International Lighting Fair (Autumn Edition) et le Hong Kong International Outdoor and Tech Light Expo. Sous le thème « Light and Life », ces foires présenteront un large choix de… Read More…