L’arc électrique : comprendre les dangers cachés derrière les acronymes (partie 3)

Arc Flash Risk Assessment

 

Jim Pollard

L’arc électrique est une explosion électrique et représente l’un des risques les plus complexes sur les lieux de travail. L’arc électrique est souvent décrit par une terminologie technique à l’aide d’acronymes. La semaine dernière nous avons publié les principaux acronymes associés à l’arc électrique et leur définition. Mais derrière tous ces acronymes il existe une explication simple de l’arc électrique. Il est important de comprendre que l’arc électrique n’a rien à voir avec la soudure, il s’agit d’un risque électrique. En l’espace d’un millième de seconde, la température produite par un arc en son cœur peut atteindre quatre fois la chaleur de la surface du soleil. Il existe d’autres risques associés à l’arc. 

In Part 1, Jim Pollard discusses Basic Arc Flash Terminology
In Part 2, Jim Pollard discusses Assessing Arc Flash Hazards

Arc flash, a type of electrical explosion, is one of the most complex workplace risks that exists. It is often described using technical terminology and several acronyms. But beneath the alphabet soup of letters and numbers associated with workplace electrical safety there is a simple explanation for arc flash. 

Assessing the hazard

The latest edition of CSA Z462, published in January, requires an arc flash risk assessment. This process is used to determine if an arc flash hazard exists (hazard identification), estimating the potential severity of injury or damage to health and estimating the likelihood of the occurrence. Risk is defined as being a combination of the severity and likelihood. The requirement to perform an arc flash risk assessment is a fundamental part of any comprehensive electrical safety program. Different types of risk assessment processes can be used, including the arc flash PPE category method within the CSA Z462-15 standard. 

The arc flash PPE category method requires the use of tables from within the CSA Z462-15 standard. The following steps are completed when using this method:

• Determine if arc flash PPE is required through arc flash hazard identification (work task and equipment condition)

• Determine arc flash PPE categories for AC and DC systems (equipment types, voltage levels and specific electrical parameters)

• Outline arc flash PPE and other personal protective equipment requirements for each of the arc flash PPE categories (1-4)

The incident energy analysis method requires the use of engineering based calculations using the IEEE 1584 standard to estimate the incident energy exposure level. Arc flash PPE is then selected based on the incident energy so the arc rating matches or exceeds the incident energy calculated.

PPE is one of the most readily available solutions to protect workers; however, it should be used as a last line of defense.

Arc flash PPE consists of specially designed and appropriately tested products suitable for use by workers that need protection from the heat of an arc flash hazard. Employers are required to ensure workers within the arc flash boundary wear appropriate full body protection when it is determined that arc flash PPE is necessary based on an arc flash risk assessment. 

There are hundreds, if not thousands, of different arc flash PPE products available on the market. Arc-rated PPE product segments include clothing, face shields, arc flash suits, outerwear and specialized equipment. All arc-rated PPE is available with the associated laboratory testing documentation — employers just need to ask for it. Unlikeshock protective PPE, arc flash PPE doesn’t require recertification. At the very least, all arc-rated PPE shall indicate compliance with ASTM F1506, which outlines performance specification for flame resistant and arc flash textiles specifically for electrical workers.

The product label is the best indication of its compliance, but only destructive testing can verify a manufacturer’s claims

Training is also an important component and there are several formats available, including on-the-job, e-learning, instructor-led and blended learning (e-learning and instructor-led training). Both e-learning and instructor-led training formats can be considered classroom training, either in the traditional sense or virtual. Any worker exposed to electrical hazards in the workplace requires adequate training suitable for their role and appropriate for the risk of their exposure. This includes both electrical and non-electrical workers.

In Part 1, Jim Pollard discusses Basic Arc Flash Terminology
In Part 2, Jim Pollard discusses Assessing Arc Flash Hazards


Jim is a member of several technical committees, including CSA Z462. He is the owner of Unlimited PPE in Stoney Creek, Ont., and he can be reached at jim@unlimitedppe.com or (905) 573-0300.

Reprinted by permission of Canadian Occupational Safety © Thomson Reuters Canada Ltd., April/May 2015, Toronto, Ontario, 1-800-387-5164. Web: www.cos-mag.com.

 

Related Articles


Monde en mouvement

  • Lumen annonce l’agrandissement de son centre de distribution à Laval

    Lumen annonce l’agrandissement de son centre de distribution à Laval

    11-octobre-2024 Lumen a annoncé l’inauguration officielle de son centre de distribution de Laval sur LinkedIn. « Le 13 septembre dernier, nous avons officiellement inauguré l’agrandissement de notre centre de distribution de Laval ! Cet événement marquant a réuni plus de 3000 clients, fournisseurs, ministres et journalistes venus de partout au Québec pour découvrir nos nouvelles installations, » a déclaré l’entreprise… Read More…

  • Prosynergic représente fièrement NOARK Électrique dans la région du Québec 

    Prosynergic représente fièrement NOARK Électrique dans la région du Québec 

    11-octobre-2024 Prosynergic représente fièrement NOARK Électrique dans la région du Québec Prosynergic, un agent manufacturier fort de plus de 30 ans de spécialisation en automatisation, contrôle de mouvement, mécatronique et sécurité des machines, représente NOARK Électrique dans la région du Québec. Gilles Laberge, fondateur de Prosynergic en 2017, a déclaré : « Nous croyons que représenter NOARK au… Read More…


Formation et événements